View Full Version : Enemy of the Adventure Team Playset

06-11-2015, 07:31 AM
As promised, I told everyone I was working on an 1/6 scale playset like my Serpent Fortress but this one will have elements of Terron Industries/The Black Dragon Crime Syndicate M.A.R.S. and yes even something for The Terror that is Doctor Isotope....Please note this is just for scale and NOT the final colors (I had to order ink, so my colors were running out) This is to show SCALE!!!!1177

06-11-2015, 09:29 AM
Neat, what will you use for your final construction, cardbord? Foam Core? Looks really cool can't wait to see the finished product.

06-11-2015, 09:49 PM
The inner walls will be Cardboard, but the floors will be foam core. I've noticed the size differences in the original Adventure Team figures and my more modern 12 inch Joes, looks like I might have a few more adjustments to do, but it will be coming along. I ordered 3 replacement sets of ink for the printer, I've had to go in and resize everything, and so far the design is going to rock here's the first walls. PLEASE NOTE THAT THESE ARE NOT THE FINAL IMAGES, I still have adjustments to make.

these 2 walls open in paint, page setup 4 pages by 4 pages.........if you really want 1/6 scale you can go 6 pages by 6 pages, but I will warn you doing so will take up a lot of room and a LOT of ink. I chose 4 by 4 because this will be going in my son's room once completed.



06-13-2015, 10:58 AM
Reworked images, here's the links.

Room 1 (inside and outside)



Room 2 (inside and outside) * These images may be changed for room 2, But I'm putting them up for viewing to show progress!



06-13-2015, 12:32 PM
Wall #2 Floor Inside and outside. print 2 by 2 through paint.



06-13-2015, 05:13 PM
Another Floor completed, This is for the lab



Computer Station (had to make a few minor adjustments for the 1/6 scale.


Here's the Stockade, I only had to rework some minor images when I brought it up to 1/6 scale.


06-14-2015, 04:18 PM
While I'm reworking the images I figured I could give all of you a little something to print out......something you can place anywhere within the dio, or to use on your own missions. I hope you guys like it, I may change the final design on it as well, but here's a nice add on....



http://s24.postimg.org/6vmbsfuy9/marscrate.jpg (http://postimg.org/image/6vmbsfuy9/)

06-15-2015, 05:39 PM
Day 4 Progress Report.

Reworked several images for the walls, I noticed some problems thankfully they've been corrected. Here's a scale progress shot.


06-15-2015, 07:41 PM
Folded and put in the floor ( I will have to strengthen the floor with styrene or cardboard, but here's a few shots).


06-17-2015, 04:28 AM
Went back in and worked on cleaning up the images I was using on the Stockade, and the computer, I'll have progress pics up later. Feel free to leave comments, I'd like to hear your feedback.

06-19-2015, 03:03 PM
My most recent W.I.P. pics are up


06-20-2015, 03:53 PM
Working on the top floor room divider (this is a 2 sided piece that divides the top floor)

Here's a look at side 1 (I'll have the full sized pics up on facebook later).

It's paper settings are 2 pages by 2 pages.

06-20-2015, 03:57 PM
1184W.I.P. Shot of side 2 of the room divider......still not sure if I'm going to change it, but I'm putting up the first draft to get some feedback.

06-20-2015, 04:21 PM
Any chance you could give us a Rough idea of what the whole thing is supposed to look like instead of simply showing us individual parts Though I admit the various Walls themselves look nice but it's hard for me at least to figure out How many total zones there are supposed to be.

06-20-2015, 05:58 PM
It's still under the build phase, but here you go.


06-20-2015, 06:22 PM
OK that does help

06-21-2015, 10:01 AM
Steel_Brigade_Plastica No problem, once I complete the build it will be offered as a FREE Download off of my facebook
(Living the Adventure Dios). I will have step by step directions for the build, (paper settings for each wall). What this thread is for is the Work in progress of this 1/6 scale project, I have to go in once the prototype is built and rearrange images because as you can see the build's walls are folded in sections, so often I have to move or resize for the final from the prototype.

06-21-2015, 10:51 AM
I doubt I'd be actually using this fine work of art myself at least NOT for 1/6 scale figures since I'm part of the 1/18 scale community.

06-22-2015, 02:55 PM
Alright, I added a TON of new pictures today to show my progress on my 1/6 scale project, once completed this will be a FREE Download.

And not to worry Steel_Brigade_Plastica.....there's a load of 1/18th scale dios on my dios page that are all free as well!


06-23-2015, 11:54 PM
Working on tweaking a few images (where walls fold I've had to slightly move an image on some), but the download for this will be coming soon. This is but the first of many 1/6 scaled sets I have planned. Just wait till you see what's coming next!

06-25-2015, 09:24 AM
A little Optional Add On piece ( MARS ANTI Aircraft Weapons System).

07-05-2015, 06:12 PM
Another wall ready!

07-06-2015, 09:41 PM
More pics are coming guys, My ink just arrived!